Product Overview

Our 20ft expandable container house is the compact model of our double-wing modular prefab range. It is fully assembled, insulated and finished in our factory before shipment.
When folded, the unit measures only 5800 mm in length and 2.2m in width, so two complete houses load into one 40HQ container. Once delivered to site, the two wings open outwards 2.0 m on each side, turning the 2.2 m transport width into a 6.2 m floor width and a 36㎡ living area - the same double-wing design as our 30ft model.
All windows, doors, electrical wiring and plumbing pipes are pre-installed. No heavy construction required on site. A 3–4 person team can finish unfolding and fixing within 1–1.5 hours.
Designed for all-weather outdoor use, this expandable home features hot-dip galvanized steel frame, weather-resistant exterior cladding and insulated sandwich panels. It delivers reliable performance for wind, rain and cold climate.
Key Features
- Low Shipping Cost. Folded width only 2.2m, 2 units per 40HQ. Freight per unit stays close to a standard 20ft shipment, well below a fixed-size container home.
- Fast Installation. 1–1.5 hours for full expansion. No concrete foundation mandatory (optional ground beams). Moveable & reusable.
- Full Factory Pre-finish. Pre-wired, pre-plumbed, windows & doors fitted. Ready to use after connection to water & power.
- Robust Steel Structure. Q235B hot galvanized steel frame, anti-rust coating, service life over 30 years.
- Compact Yet Workable Layout. 36㎡ takes a one-bedroom plus living area, or a studio layout with kitchenette and bathroom. Interior partition, exterior colour, flooring and door styles are all customizable.
- All-Weather Insulation. Optional EPS / Rockwool / PU sandwich panels, good heat insulation, soundproof and moisture-proof.
- Wide Application. Granny flat, backyard ADU, Airbnb holiday cabin, site office, ticket kiosk, farm accommodation, emergency shelter.
Specification
|
Item |
Specification |
|
Model |
20ft Double-wing Expandable Container House |
|
Folded Size |
5800 × 2200 × 2480 mm |
|
Expanded Overall Size |
5800 × 6200 × 2480 mm |
|
Total Usable Area |
~36 ㎡ |
|
Main Frame |
Q235B Hot-dip galvanized steel frame |
|
Wall Panel |
50/75mm Sandwich Panel (EPS / Rockwool / PU optional) |
|
Exterior Cladding |
Decorative metal siding (as shown) |
|
Door |
Aluminium double glass entrance door |
|
Window |
Aluminium sliding window with double tempered glass |
|
Floor |
MGO board / SPC vinyl floor / PVC floor optional |
|
Weight |
3.1–3.7 Ton |
|
Loading |
2 sets per 40HQ container |
|
Installation Time |
1–1.5 hours (3–4 workers) |
Shipping & Loading Instruction
Loading: 2 sets per 40HQ. Each house is fully folded and wings locked before loading. The two units are placed end to end lengthwise along the container floor.
The two folded units occupy about 11.6 m of the 12.03 m internal length, leaving roughly 0.4 m at the door end. Accessories (bolts, sealant, pipe fittings, installation tools) are packed in wooden crates and stowed in that gap and inside the folded wings. Units are secured with timber bracing and steel lashing belts. No stacking.
Packing list will be provided together with CI & PL for customs clearance.

Optional Upgrades
- Solar power system pre-installation
- Rockwool fireproof panels (A2 fire rating)
- Broken bridge aluminium windows & doors
- External awning / terrace canopy
- Waste water tank & septic system kit
- Complete furniture package (beds, cabinet, table)
- Smart lighting & water control system
- Custom paint colour for frame & siding
FAQs
Q1: Do I need a concrete foundation?
A: Not required. You can place it on compacted gravel, ground beams or concrete pads. Local building code needs to be checked by buyer.
Q2: Can I move this house after installation?
A: Yes. Fold the wings again, lift by crane, transport to new location for re-installation.
Q3: What certificates can you supply?
A: CE, ISO, SAA certification available for European & Australian market.
Q4: How long is your production lead time?
A: Normally 15–25 working days after deposit received.
Q5: Can I customize the colour and interior?
A: Yes. We support custom exterior colour, partition design and interior finishes.
Q6: How do I choose between the 20ft and the 30ft model?
A: Both share the same 2.2m folded width and 6.2m expanded depth. The 20ft body is 5.8m long and gives 36㎡ for one bedroom or a studio, and two units fit in one 40HQ; the 30ft body is 9m long and gives 56㎡ for two bedrooms, at one unit per 40HQ.
Hot Tags: 20ft expandable container house, China 20ft expandable container house manufacturers, suppliers, factory



