Large Equipment Steel Skid Base
Product Overview
Our Large Equipment Steel Skid Base is a made-to-order heavy welded steel skid that carries industrial equipment and delivers finished mounting interfaces to the equipment manufacturer. It is produced by Liaoning WanXiang Steel Structure Engineering Co., Ltd. for equipment builders, skid integrators and project steelwork packages.
The supply scope covers the skid frame group, stiffening plates, raised supports and locating support frames; front and rear supports and locating keys; adjusting and connecting accessories such as shims, adjusting blocks, set screws, pins and bolts; and auxiliary items such as lifting lugs and grounding ears. The work links a large welded structure with mounting faces, locating fits and matching hardware in one coordinated assembly.
Manufacturing follows a defined route: technical review and drawing deepening, part splitting and material preparation, fit-up and welding with process control, large-part milling and small-part machining, surface treatment and pre-assembly, and final pre-dispatch inspection and handover. Post-weld stress relief and non-destructive testing are carried out where the project documents require, with the relevant process records retained.
Wanxiang brings more than 20 years of steel construction experience together with recent equipment-base fabrication experience. The reference case shown in our materials has a total assembly dimension of 12,000 × 4,000 mm; this figure is a case-specific drawing value, not a published maximum capacity.
Supply scope, drawing version, material grade and inspection requirements are confirmed against the contract and approved drawings. Strength and stress calculations remain within the agreed responsibility boundary, separate from fabrication deepening.
Key Features
Machined Mounting Interfaces.
Mounting faces, locating dimensions and geometric requirements are processed to the approved machining drawings; large-part milling and small-part machining are arranged in our shop.
Precision Control.
In the reference case, mounting-face flatness is 0.1 mm, parallelism to datum A is 0.1 mm, mounting height is X ±0.1 mm and the machined top surface is Ra 3.2 μm; local flatness, coplanar levelness and inter-plane parallelism are controlled within the limits stated on the project drawings.
Welded Structure With NDT.
Frames, stiffeners and supports are welded to drawing; weld quality and dimensions are checked, and where the supply specification requires, all welds undergo 100% non-destructive testing with reports provided.
Detailing and Locating Parts.
Locating keys, slot plates, pin holes and matching shims, set screws, pins and bolts are prepared to the fit marks on the part drawings, such as g6 keys and H7 pin holes.
Part-specific Surface Treatment.
Small parts are blued or blackened per drawing; non-machined skid surfaces are blasted and coated to the project painting card; machined faces are protected during transit.
Pre-assembly and Handover.
Components are trial-fitted and matched before dispatch, with a packing list and a separate list of items left for site fitting.
Custom Engineering.
Layout, supports, holes, interfaces, finish and hardware follow the customer's approved drawings; the supply scope is clarified before quotation.
Relevant Fabrication Experience.
Beyond equipment skids, our record covers industrial workshops, complex steel members and environmental-equipment steelwork, supporting similar welded-frame and machined-interface packages.
Specification
|
Item |
Specification |
|
Product Type |
Custom large equipment steel skid base: welded skid frame with machined mounting interfaces |
|
Reference Case Size |
12,000 × 4,000 mm total assembly (case drawing value; not the maximum capacity) |
|
Main Structure |
Welded frame, stiffening plates, raised supports and locating support frames |
|
Mounting Faces |
Machined milling surfaces to approved machining drawings |
|
Reference Face Tolerances |
Flatness 0.1 mm; parallelism to datum A 0.1 mm; height X ±0.1 mm; surface roughness Ra 3.2 μm |
|
Reference Local Precision |
Local flatness ≤75 μm per metre; coplanar mounting-face levelness ≤125 μm; inter-plane parallelism ≤125 μm |
|
Locating Details |
Locating keys, slot plates, pin holes (e.g. Ø16H7 / Ø20H7), shims, set screws, pins and bolts per drawing |
|
Welding Inspection |
Weld dimensions and quality checked; 100% NDT and reports where required by the supply specification |
|
Small-part Finish |
Blued / blackened; selected parts quenched and tempered to drawing hardness (e.g. HB 187–235 or HB 210–240) |
|
Non-machined Surface |
Sa2.5 blast, profile 30–85 μm; coating to project painting card (e.g. acrylic polyurethane topcoat 80–90 μm) |
|
Pre-assembly |
Trial fit, part matching, packing list and site-fit handover list |
|
Supply Basis |
Contract and approved drawings; strength / stress calculation per the agreed responsibility boundary |
|
Target Applications |
Equipment skids, pump skids, support frames, assembly platforms, module frames and access platforms |
Delivery & Packing Instruction
Made to order. Lead time and delivery date are agreed after drawing review, scope confirmation and order placement; a first-article or first-batch trial plan can be arranged before repeat batches.
Pre-dispatch check covers dimensions, elevation, hole positions and diameters, flatness, welds, coating condition and small-part finish; the corresponding inspection records are handed over with the goods.
Parts are identified by drawing number. Pre-assembled groups are secured for transport, and loose accessories such as shims, pins, bolts and hardware are packed in separate crates. Machined faces are protected against moisture, scratch and corrosion in transit.
Items requiring on-site alignment, such as certain pin holes and spot-welded parts, are listed on the site-fit handover sheet; on-site alignment and final welding remain within the installing party's scope.
Documents provided for handover include the packing list, dimension and weld records, applicable NDT reports, coating thickness records and the site-fit handover list.
Optional Upgrades
First-article or first-batch trial before series delivery
Additional NDT (UT / MT / PT) and third-party inspection reports
Custom coating systems: heat-resistant, anti-corrosion or project-card colour
Hot-dip galvanizing for outdoor or coastal service, subject to project review
Numbered pre-assembled packing for repeat batches
Design deepening: member splitting, welding sequence and interface review against customer drawings
On-site installation supervision or guidance, scope agreed separately
Matching hardware kit: locating keys, pins, shims, set screws and bolts to drawing
FAQs
Q1: Do you manufacture to our own drawings?
A: Yes. We review the drawing package, supply scope, datums, tolerances, material and finish, then confirm a quotation basis and a first-article or first-batch plan.
Q2: What is the largest skid size you can handle?
A: The 12,000 × 4,000 mm figure is the reference case assembly, not a published capacity limit. Size, weight and machining scope are assessed against your drawings and our shop facilities during the review.
Q3: Which tolerances can you hold on mounting faces?
A: The reference case calls for 0.1 mm flatness and parallelism to datum A, height X ±0.1 mm and Ra 3.2 μm. Actual tolerances follow your approved drawings and are agreed before production.
Q4: Are the welds inspected?
A: Weld dimensions and quality are checked; where the supply specification requires, all welds undergo 100% NDT, with reports provided.
Q5: What about coating and surface finish?
A: Small parts are blued or blackened per drawing; non-machined surfaces are blasted to Sa2.5 and coated to the project painting card; machined faces are protected for transit.
Q6: What information do you need to prepare a quotation?
A: A representative drawing package, quantities, target delivery date, material and finish requirements, and any inspection standards. We return a scope review and a clear quotation basis.
Hot Tags: large equipment steel skid base, China large equipment steel skid base manufacturers, suppliers, factory



